Beautiful design of the walls in the bathroom: the best ideas for the interior in the photo

The modern industry of manufacturing materials for surface finishing allows you to recreate the most unusual fantasy in any room. Just a few decades ago, no one could have imagined that on the wall in a room where there is always damp and not enough space, you can use something other than inexpensive tile or paint.

Now the bathroom can be decorated with any kind of decorative material. The main thing is that he has a special composition that will allow such wallpaper or even a wooden coating to withstand the aggressive environment of the bathroom.

General recommendations for the design of the bathroom

One of the main rules for finishing a bathroom is compliance with all the rules and technology. In this case, it does not matter which of the materials will be selected. High humidity and sudden changes in temperature can destroy the most expensive finish if it was not done correctly.

Most often there is nothing complicated in such work and it is enough to just follow the instructions attached to the selected material for decoration. The first and fundamental step before applying any coating will be the alignment of the walls.

Depending on the degree of unevenness of the walls, various methods of surface preparation are selected. If the walls have only a certain amount of damage, and their main part is even, then you can use a gypsum mixture to mask these imperfections. The dry mix diluted in a special container is applied to the wall with a spatula and evenly distributed at the site of damage. After drying the wall thus treated, it must be treated with abrasive paper. Get a flat surface. This method is the simplest and most economical.

In the event that the entire wall is damaged, it is better to sheathe it with a completely waterproof gypsum board, which is used in rooms with high humidity. You need to start such work with mounting a frame of metal profiles. The further operational qualities of the entire system will depend on the quality of such a crate. In addition, you need to plan which of the communications will be hidden under drywall, and which will remain available.

After everything has been verified and the frames are installed, sheets of drywall can be fixed on them. An antibacterial agent must be applied under any coating. This will protect the room from the multiplication of fungal organisms. The finished surface can be decorated with any selected material.

Materials for bathroom design

The most important factor for the ideal type of bathroom is the selected finishing materials. The color and texture of the walls of the room, as well as the performance and the possibility of further decoration of the room, depend on them.

The variety of materials adapted for the difficult conditions of the bathroom is very large:

PVC panels;
paints;
stickers;
ceramics;
a natural stone;
lining;

wallpapers and more.

Tile in the bathroom

The most common material for decorating a bathroom is, without a doubt, tile. This is explained by the high strength and water resistance of such a material. In addition, dust and dirt do not accumulate on tiled surfaces and are easy to clean. At the same time, the tile is not afraid of processing with chemicals.

Tile also performs its decorative functions in the best way. A variety of color palette, shapes, textures and sizes will provide the ability to reproduce any designer's idea. It looks advantageous as grouting, selected tone-on-tone with the main coating, and contrasting shades.

Tile gluing in the bathroom is almost no different from facing other rooms. This is the universality of such a material - it can be used for any room.

Wall panels

Another popular solution for decorating bathroom walls is steel wall panels. This is a great way to create an attractive look on the walls at a relatively low cost. Installation of plastic panels does not require much effort and special knowledge. This is one of the few materials that does not require mandatory alignment of the walls, but simply hides all the flaws.

The frame for such a material is made of wooden bars, previously impregnated with water-repellent and antifungal substances. Such a frame is sheathed with plastic panels. The installation technology is similar to the use of drywall.

Joints with plumbing and corners must be treated with sealant. The decorative effect can be enhanced by using special corners and skirting boards, which can be found in the same stores where the panels themselves were purchased. Such material can be used to decorate the ceiling and incorporate luminaires into it. Such a bathroom interior decoration technique will give a practical and beautiful room that does not require additional costs.

Painted walls

Another classic and inexpensive way to design a bathroom is to paint the walls with waterproof paint. Suitable varieties include latex paints. In addition to moisture repellent properties, this product is also resistant to fats and other contaminants.

The only drawback of such coverage may be the need for thorough preparation, which will require time and effort. Under the paint, the wall should be perfectly flat. Then the effect of such a design technique will be the best.

Such universal material makes it possible to design a room in any style and color scheme. Using a stencil, you can apply any pattern or even draw an artwork directly on the wall of the room.

Mosaic for bathroom walls

An unusual way to decorate the interior of the bathroom is a mosaic. This choice will ensure the uniqueness of the design of the room. In this case, it does not matter at all whether the elements of the picture will be large or small. The material also does not have much significance. You can choose glass, tile, stone and other materials. You can use both individual parts to create your own pattern, and ready-made panels glued in advance on a polymer base.

Stickers in the design of the bathroom

Bathroom wall stickers are not the main decoration. This is just a decorative element that adds to the interior a highlight and unusual expression of the designer.

The obvious advantage of this coating is the unlimited possibilities of choosing the theme of the picture and color of the image. This can be either an original ornament or a family photo of the owners of the apartment. On the sticker you can apply any image and the range of topics is limited only by the imagination of the author.

Linoleum on the wall. Original move

It is difficult to think of a more unusual coating for a bathroom wall than linoleum. Nevertheless, this is one of the possible options. The low cost and simple gluing technique no longer allow us to classify this idea as insane. In addition, you can use not only ordinary floor material, but also special types that are designed specifically for wall decoration.

Previously, the surface should be carefully prepared and treated with all protective substances recommended by the manufacturer. In this case, this unusual coating will last for many years and will surprise visitors with its originality.

We can say that in the bathroom you can use any kind of wall coverings. The main thing is that the surface preparation matches the material used and the features of the room. Then granite, and wallpaper, and mirrors will organically look on the walls of the bathtub, without bringing any trouble to the owner of the house.